Strenx® 100 XF Sheet Specifications
Strenx® 100 XF is a thermomechanically rolled steel, made for cold forming, with a minimum yield strength of 100 ksi (100,000 psi). Strenx® 100 XF is produced by SSAB the producers of Docol® Tube R8.
Strenx® 100 XF has good welding, cold forming and cutting performance, offering a great substitute for 4130 Chrome Moly Sheets. Strenx® 100 XF being both strong and formable, eliminates the need for annealed or normalized conditions. Strenx® 100 XF is a cold forming steel not suited for heat treatments. Heat treating may result in the material losing its guaranteed mechanical properties.
Typical Mechanical Properties
Thickness |
Tensile Strength min. |
Yield Strength min. |
Elongation min. % in 2" |
Min. inner bending radius for a 90° bend |
|---|---|---|---|---|
0.08” - 0.14” |
110,000 psi |
100,000 psi |
15% |
0.8 x thickness |
0.14” - 0.24” |
110,000 psi |
100,000 psi |
15% |
1.2 x thickness |
0.24” – 0.39” |
110,000 psi |
100,000 psi |
15% |
1.6 x thickness |
Chemical Analysis – Percent by Weight
C |
Si |
Mn |
P |
S |
Al |
Nb 2) |
V 2) |
Ti 2) |
|---|---|---|---|---|---|---|---|---|
.12 (max) |
.21 (max) |
2.1 (max) |
.025 (max) |
.010 (max) |
.015 (min) |
.09 (max) |
.20 (max) |
.15 (max) |